CXAS42213交叉点交换机为应用程序提供了灵活的选项。16个输入可以路由到8个输出中的任何一个。每个输入可以路由到一个或多个输出，但只有一个输入可以路由到任何一个输出。对于一对多路由，多个输出可以连接到同一个输入通道。输入输出路由通过与I2C兼容的数字接口控制。
对于模拟信号切换应用，根据配置，8个输出可以是8个单输出或4个差分输出。交叉点结构可以降低PCB的复杂度。对于数字信号切换，CXAS42213支持高达400kHz的数字信号。
CXAS42213的电阻曲线在整个模拟输入范围内非常平坦，确保切换音频信号时具有良好的线性度和低失真。对于视频应用程序，CXAS42213最多支持1080p或VGA视频。
•供电范围：2.7V至5.5V
•16×8交叉点开关
•一对一或一对多输出切换
•支持双向传输
•I2C兼容数字接口，标准模式
•支持WUXGA（1920×1200）视频
•支持低噪声模拟信号切换
•-3dB带宽：250MHz
[ CXAS42213 ]
产品技术资料帮助
查看全部>
7.相关产品
产品概述 返回TOP
For analog signal switching application, 8 outputs can be 8 single outputs or 4 differential outputs depending on configuration. Crosspoint structure can reduce PCB complexity. For digital signal switching, CXAS42213 supports up to 400kHz digital signal.
The resistance profile of CXAS42213 is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals. For video application, CXAS42213 supports up to 1080p or VGA video.
The CXAS42213 is available in Green LQFP-7×7-32L package. It operates over an ambient temperature range of -40℃ to +85℃.
产品特点 返回TOP
• Supply Range: 2.7V to 5.5V
• 16 × 8 Crosspoint Switch
• One-to-One or One-to-Many Output Switching
• Supports Bidirectional Transmission
• I2C-Compatible Digital Interface, Standard Mode
• Supports WUXGA (1920 × 1200) Video
• Supports Low Noise Analog Signal Switching
• -3dB Bandwidth: 250MHz
• Available in Green LQFP-7×7-32L Package
• Extended Industrial Temperature Range:
-40℃ to +85℃
应用范围 返回TOP
Video and Audio Matrix Switching System
Audio and Video Receiver
Automotive Entertainment System
Data Acquisition and Control System
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
a
|
特殊开关系列 |
||||||||
|
Part Number |
Feature |
VCC (Min)V |
VCC (Max)V |
-3dB Bandwidth |
Interface |
RON (Ω) |
Crosstalk (-dB) |
Package |
|
12x9,Buffered |
3.1 |
5.5 |
84 |
I2C |
74 |
SSOP-28 TSSOP-28 |
||
|
8x6, Buffered |
3.1 |
5.5 |
88 |
I2C |
77 |
TSSOP-24 |
||
|
SIM I/F Swap |
1.8 |
5.5 |
400 |
I/O |
80 |
TQFN-3x3-20L |
||
|
4-2:2, Passive Swap |
1.8 |
5.5 |
400 |
I/O |
12 |
80 |
TQFN-3x3-20L |
|
|
Six Channels 1:2 Multiplexer |
2 |
5 |
450 |
I/O |
8.5 |
55 |
TSSOP-24 TQFN-4x4-24L |
|
|
16x4,Passive |
2.7 |
5.5 |
120 |
I2C |
30 |
110 |
TSSOP-28 TQFN-4x4-28L |
|
|
16x8 Passive |
2.7 |
5.5 |
120 |
I2C |
30 |
110 |
TQFN-5x5-32L LQFP-7x7-32L |
|
|
1:16, Multiplexer |
3.3 |
13.2 |
80 |
I/O |
24 |
70 |
TQFN-5x5-32L TSSOP-28 |
|
|
Dual 1:8, Multiplexer |
3.3 |
13.2 |
135 |
I/O |
24 |
70 |
TQFN-5x5-32L TSSOP-28 |
|
|
High Speed, 16x8, Passive, I2C Interface |
2.7 |
5.5 |
250 |
I2C |
30 |
110 |
LQFP-7x7-32L |
|
|
1:8, Multiplexer |
3.3 |
13.2 |
80 |
I/O |
24 |
70 |
TSSOP-16 |
|
|
16x8, Passive |
4.5 |
13.2 |
45 |
I/O |
40 |
47 |
LQFP-10x10-44L PLCC-44L |
|
|
High Speed, 16x8, Passive, Serial Digital Interface |
2.7 |
5.5 |
250 |
SPI |
28 |
55 |
LQFP-7x7-32L |
|
|
High Speed, 2:1 32-Bit Bus Multiplexer |
3.3 |
5 |
100 |
I/O |
11 |
60 |
LQFP-14x14-100L |
|
|
High Speed, 3-1:3Multiplexer |
2.5 |
5.5 |
350 |
I/O |
7 |
60 |
TQFN-3x3-20L TSSOP-20 |
|
|
High Speed, 2-1:3 Multiplexer |
2.7 |
4.3 |
380/400 |
I/O |
4/9 |
90 |
UTQFN-2.2x1.4-12L |
|
◀ 上一篇:CXAS42212高速单片模拟多路复用器由8个差分通道组成将8个差分输入中的一个切换到由3位二进制地址行（A0、A1和A2）确定的公共差分输出EN输入启用或禁用设备-3dB带宽135MHz轨对轨运行
下一篇▶:CXAS42214高速单片8:1模拟信号多路复用器将8个输入中的一个切换到公共输出EN输入启用或禁用设备3.3V至6.6V双电源-3dB带宽80MHz轨对轨运行开关的24Ω导通电阻
|
|||||||||||||||||
