CXSD6241 The internal generated 0.6V precision feedback reference voltage is designed for low output voltage. Low RDS(ON) synchronous switch dramatically reduces conduction loss,...

CXSD6242 The internal generated 0.6V precision feedback reference voltage is designed for low output voltage. Low RDS(ON) synchronous switch dramatically reduces conduction loss. To extend battery life for portable application, 100% duty cycle is supported for low-dropout operation. Shutdown mode al,...

CXSD61048 achieves 2A continuous output current with excellent load and line regulation. The switching frequency is programmable from 100kHz to 500 kHz and the synchronous architecture provides for highly efficient designs,...

CXSD61048 achieves 2A continuous output current with excellent load and line regulation. The switching frequency is programmable from 100kHz to 500 kHz and the synchronous architecture provides for highly efficient designs,...

CXSD61048A The switcching freqquency is prrogrammable from 100 kHz to 500 kHz and the syynchronous architecturee provides for highly effficient dessigns.Currrent mode operation prrovides fast transient ressponse and eases loop staabilization,...

CXSD61047A The device integrates 90 mΩ MOSFETS that provide 3A continuous load current over a wide operating input voltage of 4.5V to 27V.Current mode control provides fast transient response and cycleby-cycle current limit.,...

CXSD61047 The internal synchronous power switches provide high efficiency without the use of an external Schottky diode. At light loads, regulators operate in low frequency to maintain high efficiency and low output ripple.,...

CXSD61047B fault protection includes cycle-bycycle current limit, input UVLO, output over voltage protection and thermal shutdown. Besides, adjustable soft-start function prevents inrush current at turn-on. ,...

CXSD61051 The switching frequency is programmable from 100KHz to 500KHz and the synchronous architecture provides for highly efficient designs. Current mode operation provides fast transient response and eases loop stabilization,...

CXSD61052 nternal synchronous power switches provide high efficiency without
the use of an external Schottky diode. At light loads, regulators operate in low frequency to
maintain high efficiency and low output ripple. Current mode control provides tight load transient response
and cycle-by-cycle c,...

CXSD61053 Current mode PWM control allows the use of small external components, such as ceramic input and output caps, as well as small inductors, while still providing low output ripples,...

CXSD61054 This device offers two operation modes,PWM control and PFM Mode
switching control, which allows a high efficiency over the wider range of the
load.,...

CXSD61055 is a fully integrated, high– efficiency 2A synchronous rectified step-down converter.The CXSD61055 operates at high efficiency over a wide output current load range.
This device offers two operation modes, PWM control and PFM Mode switching control, which allows a high efficiency over the,...

CXSD61055A fault protection includes cycle-by-cycle current limit,
UVLO, output overvoltage protection and thermal shutdown. The adjustable
soft-start function prevents inrush current at turn-on. This device uses current
mode control scheme which provides fast transient response,...

CXSD61055B It offers a very compact solution to achieve a 2A continuous output current over a wide input supply range, with excellent load and line regulation.,...

CXSD61056 With a fixed switching frequency of 1.4MHz, this current mode PWM controlled converter allows the use of small external components, such as ceramic input and output caps, as well as small inductors, while still providing low output ripples,...

CXSD61057 With a fixed switching frequency of 650KHz, this current mode PWM controlled converter allows the use of small external components, such as ceramic input and output caps, as well as small inductors.,...

CXSD62018 On top of the integrated internal synchronous rectifier
that eliminates external Schottky diode, CXSD62018 also employs a proprietary
control scheme that switches the device into a power save mode during light
load, thereby extending the range of high efficiency operation,...

CXSD6219是一款非常通用的工作电压达18V，输出电流达2/2.5A，
能量转换效率达95%的高压同步降压转换器。脚位和外围应用与通用的MPS1482完
全相同,...

CXSD6219B非常通用的工作电压达18V，输出电流达2/2.5A，
能量转换效率达95%的高压同步降压转换器。脚位和外围应用与通用的MPS1482完
全相同。同时在MPS1482的基础上，增加了轻载高效功能，和输入OVP，使得
CXSD6219 CXSD6219B待机功耗从10mA量级降到了1mA，同时可以耐受高达
30V的高压脉冲。CXSD6219 CXSD6219B采用SOP8封装，可输出2A电流,...

CXSD6220非常通用的工作电压达18V，输出电流达3A，能量转换效率达95%的高压同步降压转换器。脚位和外围应用与通用的MPS1482完全相同。同时在MPS1482的基础上，增加了轻载高效功能，和输入OVP，使得CXSD6220待机功耗从10mA量级降到了1mA，同时可以耐受高达30V的高压脉冲,...

CXSD6221一款非常通用的工作电压达18V，输出电流达4A，能量转换效率达95%的高压同步降压转换器。脚位和外围应用与通用的MPS1482完全相同。同时在MPS1482的基础上，增加了轻载高效功能，和输入OVP，使得CXSD6220待机功耗从10mA量级降到了1.5mA，同时可以耐受高达30V的高压脉冲。同时CXSD6221采用了独特的电感短路保护，进一步增加了系统的,...

CXSD6222款在SOT23-8的超小封装内实现工作电压达18V，输出电流达2A，能量转换效率达91%的高压同步降压转换器。其采用了PWM/PFM自动切换的轻载高效控制模式和内部补偿的构架。是外围引脚最为节省的高压同步降压转换器 ,...

CXSD6223一颗耐压高至24V，输出电流1.2A的异步降压转换器，开关频率达1.4MHz，可以保证输出纹波很小，可用于对纹波要求很高的摄像模组领域。CXSD6223采用PWM/PFM自动切换的轻载高效模式,...

CXSD6224是一颗耐压高至24V，输出电流0.3A的异步降压转换器.。CXSD6224是专为载波模块的供电需求特别优化设计。在输出电流为30mA时，不跳频，保持高频震荡的情况下，效率高于70%。,...