CXAR41163是一款高效率,2通道全桥式驱动(BTL) D类音频功率放大器,在负载为6Ω或8Ω时驱动立体扬声器每个通道的功率为10W。CXAR41163采用全差分输入架构,相比于单端(SE)输入放大器具有更好的抗噪声能力。先进的EMI抑制技术与扩频控制只需在输出端使用廉价的磁珠便可以满足系统成本降低的电磁兼容(EMC)的要求。CXAR41163可以充分防止短路和过载,并且具有可调的功率限制电路和直流检测电路也保护所连接的扬声器。直流检测,引脚到引脚,引脚到地和引脚到电源的短路保护电路使扬声器免受生产中造成的输出直流和引脚短路。CXAR41163采用良好散热的28-pin TSSOP封装,在两层印刷电路板上可以实现全功率输出。
‧宽电源电压输入范围:4.5V至14.5V
‧改进的调制模式降低EMI
‧负载6Ω,电源电压12 V,每通道输出功率可达10W
‧负载8Ω,电源电压13V,每通道输出功率可达10W
‧差分输入或单端输入
‧扬声器保护电路
‧26dB固定增益
‧功率限制功能
‧过温和短路保护机制
[ CXAR41163 ]
产品技术资料帮助
查看全部>
7.相关产品
产品概述 返回TOP
产品特点 返回TOP
‧宽电源电压输入范围:4.5V至14.5V
‧改进的调制模式降低EMI
‧负载6Ω,电源电压12 V,每通道输出功率可达10W
‧负载8Ω,电源电压13V,每通道输出功率可达10W
‧差分输入或单端输入
‧扬声器保护电路
‧26dB固定增益
‧功率限制功能
‧过温和短路保护机制
‧带散热片的28-pin TSSOP封装
‧符合RoHS标准,100%无铅(Pb),无卤素
Wide Supply Voltage: 4.5V to 14.5V
Enhanced Modulation Scheme Reduces EMI
Emission
10-W/ch into an 6- Load From a 12-V Supply
10-W/ch into an 8- Load From a 13-V Supply
Differential Inputs or Single-Ended input
Speaker Protection Circuitry
26-dB Fixed Gain
Power Limit Function
Thermal and Short-Circuit Protection
28-pin TSSOP Package with Thermal Pad
RoHS compliant and 100% lead(Pb)-free
Halogen-Free
应用范围 返回TOP
‧电视机
‧USB音箱
‧迷你音箱
‧消费类音频设备
Televisions
USB Speaker
Mini Speaker
Consumer Audio Equipment
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
a
电路原理图 返回TOP
音频放大器 > D类 > D类放大器 |
||||||||||
Part Number |
remark |
Vin (V) |
Speaker (W) |
Speaker (Ω) |
Headphone |
No of Speaker Channel |
THD +N @ 1KHz (%) |
IQ (mA)(Typ) |
PSRR (dB) |
Package |
10-W Inductor Free Stereo Audio Amplifier with Low EMI |
4.5~14.5 |
10 |
8 |
- |
2 |
0.07 |
22 |
60 |
TSSOP-28 |
|
2W High Efficiency Mono Class-D Audio Power Amplifier with Non-Clip |
3~5 |
2 |
8 |
N/A |
1 |
0.09 |
9 |
70 |
WCSP-16 |
|
2.8W/CH Stereo Filterless Class-D Audio Amplifier with |
2.7~5.5 |
2.8 |
4 |
110mW/32Ω |
2 |
0.2 |
6.5 |
60 |
SOP-24,TQFN-20 |
|
2.5W/CH Stereo Filterless Class-D Audio Amplifier with 64-Step DC Volume Control |
2.7~5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
6.5 |
60 |
SOP-16 |
|
3.3W Mono Class-D Audio Power Amplifier with Non-Clip, Power Limit and Noise Gate |
2.5~5.5 |
3.3 |
4 |
N/A |
1 |
0.15 |
4 |
70 |
WCSP-9 |
|
2.5-W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.13 |
6.2 |
63 |
TQFN-20,TSSOP-20 |
|
Low EMI, 2.8-W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5~5.5 |
2.8 |
4 |
N/A |
1 |
0.1 |
41 |
68 |
SOP-8 |
|
Non-Clip, Low EMI, 2.8W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.8 |
4 |
N/A |
1 |
0.15 |
3.5 |
70 |
WCSP-9,TDFN-8 |
|
2.5W Stereo Class-D Audio Power Amplifier with 3D Enhancement |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
7.3 |
70 |
TQFN-24 |
|
3-W Mono Filterless Class-D Audio Power Amplifier |
2.5 ~ 5.5 |
3 |
4 |
N/A |
1 |
0.18 |
4.3 |
72 |
TDFN-8, WCSP |
|
6.5-W Mono Class-D Audio Power Amplifier |
8 ~ 24 |
6.5 |
8 |
N/A |
1 |
0.08 |
8 |
70 |
TSSOP-24 |
|
15-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
15 |
8 |
- |
2 |
0.2 |
45 |
60 |
TSSOP-28 |
|
6-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
6 |
8 |
N/A |
2 |
0.2 |
45mA |
60 |
TSSOP-28 |
|