CXLE8750

CXLE8750是一款电流调节电荷泵,非常适合为照相机闪光灯应用中的高亮度LED供电。充电泵可设置为调节闪光灯和手电筒模式的两个电流水平。
CXLE8750自动在升压和降压之间切换模式,确保LED电流不依赖于正向电压。它的开关频率为2.4MHz,允许使用微型元件。电源电压范围从2.7伏到5.5伏,非常适合由一个锂离子电池或三到四个镍镉、镍氢或碱性电池供电的所有应用。
CXLE8750还具有非常低的关机电流、自动软启动模式以限制浪涌电流以及过电流、过电压和过热关机控制。
低电流感测参考电压(50mV)允许使用小的0603电流感测电阻器。
出电流高达800mA
●火炬模式下高达95%的效率
●可调闪光模式电流
●自动降压/升压模式切换
●宽输入电压范围:2.7V至5.5V
最小外部组件:无感应器
●高频运行:2.4MHz
●低损耗传感用低50mV参考电压
●脉宽调制调光控制
●自动软启动限制涌流
●低纹波和电磁干扰

CXLE8750电流调节电荷泵适合为照相机闪光灯应用中的高亮度LED供电自动在升压和降压之间切换模式由一个锂离子电池或三到四个镍镉镍氢或碱性电池供电的所有应用可调闪光模式电流脉宽调制调光控制

产品手册

产品订购

产品简介

目录

   产品概述 返回TOPccP嘉泰姆


The CXLE8750 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH and TORCH modes. 

The CXLE8750 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. It switches at 2.4MHz, allowing the use of tiny components. The supply voltage ranges from 2.7V to 5.5V and is ideally suited for all applications powered by a single LI-Ion battery cell or three to four NiCd, NiMH, or Alkaline battery cells. 

The CXLE8750 also features a very low shutdown current, an automatic soft-start mode to limit inrush current, as well as over current, over voltage and over-Thermal shutdown control. 

A low current sense reference voltage (50mV) allows the use of small 0603 current sensing resistors. 

The CXLE8750 is available in Green DFN3×3-10L package and is specified over an ambient temperature range of -40℃ to +85℃.

   产品特点 返回TOPccP嘉泰姆


● Output Current up to 800mA ccP嘉泰姆

● Up to 95% Efficiency in Torch Mode ccP嘉泰姆

● Adjustable FLASH Mode Current ccP嘉泰姆

● Automatic Buck/Boost Mode Switchover ccP嘉泰姆

● Wide Input Voltage Range: 2.7V to 5.5V ccP嘉泰姆

● Minimum External Components: No Inductors ccP嘉泰姆

● High Frequency Operation: 2.4MHz ccP嘉泰姆

● Low 50mV Reference for Low Loss Sensing ccP嘉泰姆

● PWM Dimming Control ccP嘉泰姆

● Automatic Soft Start Limits Inrush Current ccP嘉泰姆

● Low Ripple and EMIccP嘉泰姆

   应用范围 返回TOPccP嘉泰姆


 Cellphones ccP嘉泰姆

 PADsccP嘉泰姆

   技术规格书(产品PDF) 返回TOP ccP嘉泰姆


     需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!ccP嘉泰姆

 QQ截图20160419174301.jpgccP嘉泰姆

产品封装图 返回TOPccP嘉泰姆


blob.pngccP嘉泰姆

电路原理图 返回TOPccP嘉泰姆


blob.pngccP嘉泰姆

相关芯片选择指南 返回TOP         更多同类产品......


High Power White LED

ProductccP嘉泰姆

Character Typ.  Ope. Voltage

Quie.ccP嘉泰姆

Iq  Output  LED Current Package
CXLE87100 1.0MHz OVP 3W LED Asynchronous PWM 90% 0.9~6.5V 1mA 1μA <0.8A Fix(Vfb=95mV) SOT23-6L
CXLE87100B 1.0MHz OVP 3W LED Asynchronous PWM 90% 0.9~6.5V 1mA 1μA <0.8A Auto adjust(Type   Vfb=95mV) SOT23-6L
CXLE87101 2.0MHz 1.5A Flash LED Driver 95% 2.7~5.5V 300μA 1μA 1.5A Independent RSETM/RSETF Current set pins TDFN32-14L
电源管理 > LED驱动 > 闪光灯驱动
Product Topology VIN VOVP IQ IOUT R(ON) Freq. Package Size
Min. Max. Typ. Typ. MAX. Typ. Typ. (L×W)
(V) (V) (uA) (A) (Ω) (MHz) (mm)
CXLE8747 Current Sink 2.7 5.5 - 220 0.2 - - SOT363 2.1 x 2.3
CXLE8748DA Charge Pump 2.7 5.5 5.5 300 1 0.5 2.2 DFN3030-10L 3.0 x 3.0
CXLE8749 Charge Pump 2.7 5.5 5.5 300 1 0.5 2.2 DFN3030-10L 3.0 x 3.0
CXLE8750 Charge Pump 2.7 5.5 5.5 300 0.8 0.8 2.4 DFN3030-10L 3.0 x 3.0
CXLE8751 Charge Pump 2.7 5.5 5.5 300 1 0.6 2.4 DFN3030-10L 3.0 x 3.0

◀ 上一篇:CXLE8749

返回顶部

下一篇▶:CXLE8751自动在升压和降压之间切换模式确保LED电流不依赖于正向电压电流调节电荷泵为照相机闪光灯应用中的高亮度LED供电充电泵可设置为调节闪光灯和手电筒模式的两个电流水平