CXSU63139

CXSU63139是同步整流器,固定开关频率(典型为1.2兆赫),以及电流模式升压调节器。该设备允许使用USB设备的小电感和输出电容器。电流模式控制方案具有快速的瞬态响应和良好的输出电压精度,在轻负载时,CXSU63139将自动进入脉冲频率调制(PFM)操作,以降低主开关损耗

固定1.2兆赫振荡器频率同步整流器CXSU63139低ESR输出电容稳定电流模式升压调节器92%效率

产品手册

产品订购

产品简介

目录x1T嘉泰姆

1.产品概述                       2.产品特点x1T嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 x1T嘉泰姆
5.产品封装图                     6.电路原理图                   x1T嘉泰姆
7.功能概述                        8.相关产品x1T嘉泰姆

一,产品概述(General Description)         x1T嘉泰姆


      The CXSU63139 is a synchronous rectifier, fixed switching frequency (1.2MHz typical), andx1T嘉泰姆
current-mode step-up regulator. The device allows use of small inductors and output capacitors for USB devices. The current-mode control scheme provides fast transient response and good output voltage accuracy.At light loads, the CXSU63139 will automatically enter in Pulse Frequency Modulation (PFM) operation to reduce the dominant switching losses. During PFM operation,the IC consumes very low quiescent current and maintains high efficiency over the complete load range.x1T嘉泰姆
      The CXSU63139 also includes current-limit and over-temperature shutdown to prevent damagex1T嘉泰姆
in the event of an output overload.x1T嘉泰姆
      The CXSU63139 is available in 4mmx4mm TQFN4x4-16 and DFN3x3-12 packages.x1T嘉泰姆
二.产品特点(Features)x1T嘉泰姆


1.)92% Effiicency Synchronous Boost Converter With 1000-mA Output Current Fromx1T嘉泰姆
      1.8V Input
x1T嘉泰姆
2.)Stable with Low ESR Output Capacitorsx1T嘉泰姆
3.)Fixed 1.2MHz Oscillator Frequencyx1T嘉泰姆
4.)Low EMI Converter (Integrated Anti-Ringing Function)x1T嘉泰姆
5.)Low Battery Outputx1T嘉泰姆
6.)Integrated Power Save Mode Operation to Improve Light Load Efficiencyx1T嘉泰姆
7.)Load Disconnected During Shutdownx1T嘉泰姆
8.)Output Current-Limit Protectionx1T嘉泰姆
9.)Over Temperature Protectionx1T嘉泰姆
10.)Under Voltage Protectionx1T嘉泰姆
11.)Enable/Shutdown Functionx1T嘉泰姆
12.)Available in TQFN4x4-16 and DFN3x3-12 Packagesx1T嘉泰姆
13.)Lead Free and Green Devices Available (RoHS Compliant)x1T嘉泰姆
三,应用范围 (Applications)x1T嘉泰姆


Power Bankx1T嘉泰姆
Tabletx1T嘉泰姆
Portable Equimentx1T嘉泰姆
四.下载产品资料PDF文档 x1T嘉泰姆


需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持x1T嘉泰姆

 QQ截图20160419174301.jpgx1T嘉泰姆

五,产品封装图 (Package)x1T嘉泰姆


x1T嘉泰姆

PINx1T嘉泰姆

NAMEx1T嘉泰姆

FUNCTIONx1T嘉泰姆

1,15,16x1T嘉泰姆

VOUTx1T嘉泰姆

Converter Output and IC Supply Voltage.x1T嘉泰姆

2x1T嘉泰姆

NCx1T嘉泰姆

Enable in Charge Donex1T嘉泰姆
No Internal Connection.x1T嘉泰姆

3,4x1T嘉泰姆

SWx1T嘉泰姆

Converter Switch Pin. Connect inductor here.x1T嘉泰姆

5,6,7x1T嘉泰姆

PGNDx1T嘉泰姆

Enable in Charge Donex1T嘉泰姆
Power Ground. Connect these pins to GND.x1T嘉泰姆

8x1T嘉泰姆

VBATx1T嘉泰姆

Converter Supply Voltage.                      Enable in Charge Donex1T嘉泰姆

9x1T嘉泰姆

LBIx1T嘉泰姆

Low Battery Indicator.x1T嘉泰姆

10x1T嘉泰姆

PSIx1T嘉泰姆

Power Saving Input. Force VPSI exceed 1V enter PFM. Left VPSI below 0.4V enter PWM mode.x1T嘉泰姆

11x1T嘉泰姆

ENx1T嘉泰姆

Device Enable Control Input. Force VEN exceed 1V enable the device. Left VEN below 0.4V tox1T嘉泰姆
shutdown.x1T嘉泰姆

12x1T嘉泰姆

LBOx1T嘉泰姆

Low Battery Output.x1T嘉泰姆

13x1T嘉泰姆

GNDx1T嘉泰姆

Signal Ground. Connect this pin to PGND.x1T嘉泰姆

14x1T嘉泰姆

FBx1T嘉泰姆

Converter Feedback Input.x1T嘉泰姆

Exposed Padx1T嘉泰姆

PGNDx1T嘉泰姆

Power Ground. Tie this pin to the ground island/plane through the lowest impedance connectionx1T嘉泰姆
available.x1T嘉泰姆

六.电路原理图x1T嘉泰姆


blob.pngx1T嘉泰姆

七,功能概述x1T嘉泰姆


Main Control Loopx1T嘉泰姆

The CXSU63139 is a constant frequency, synchronous rectifier, and current-mode switching regulator. x1T嘉泰姆

In normal operation, the internal N-channel power MOSFET is turned on each cycle when the oscillatorx1T嘉泰姆

 sets an internal RS latch and turned off when an internal comparator (ICMP) resets the latch. The peakx1T嘉泰姆

 inductor current which ICMP resets the RS latch is controlled by the voltage on the COMP node, which x1T嘉泰姆

is the output of the error amplifier (EAMP). An external resistive divider connected between VOUT and x1T嘉泰姆

ground allows the EAMP to receive an output feedback voltage VFB at FB pin. When the load current x1T嘉泰姆

increases, it causes a slightly decrease in VFB relative to the 0.5V reference, which in turn causes thex1T嘉泰姆

 COMP volt- age to increase until the average inductor current matches the new load current.x1T嘉泰姆
 Start-upx1T嘉泰姆
A start-up oscillator circuit is integrated in the CXSU63139.When the device enables, the circuit pumpsx1T嘉泰姆

 the output voltage high. Once the output voltage reaches 1.6V (typ),the main DC-DC circuitry turns onx1T嘉泰姆

 and boosts the output voltage to the final regulation voltage. x1T嘉泰姆
Automatic PFM/PWM mode Switchx1T嘉泰姆
The CXSU63139 is a fixed frequency PWM peak current modulation control step-up converter. At lightx1T嘉泰姆

 loads, theCXSU63139 will automatically enter in pulse frequency modulation operation to reduce the x1T嘉泰姆

dominant switching losses. In PFM operation, the inductor current may reach zero or reverse on eachx1T嘉泰姆

 pulse. A zero current comparator turns off the P-channel synchronous MOSFET, forcing DCM(Discontinuousx1T嘉泰姆

 Current Mode) operation at light load.These controls get very low quiescent current, help to maintain x1T嘉泰姆

high efficiency over the complete load range. x1T嘉泰姆
Synchronous Rectificationx1T嘉泰姆
The internal synchronous rectifier eliminates the need for an external Schottky diode, thus reducing costx1T嘉泰姆

 and board space. During the cycle off-time, the P-FET turns on and shunts the FET body diode. As a x1T嘉泰姆

result, the syn-chronous rectifier significantly improves efficiency with-out the addition of an externalx1T嘉泰姆

 component. Conversion efficiency can be as high as 92%.x1T嘉泰姆
Load Disconnectx1T嘉泰姆
Driving EN to ground places the CXSU63139 in shutdown mode. When in shutdown, the internal powerx1T嘉泰姆

 MOSFET turns off, all internal circuitry shuts down and the quies-cent supply current reduces to 1μAx1T嘉泰姆

 maximum.A special circuit is applied to disconnect the load from the input during shutdown the x1T嘉泰姆

converter. In conventional syn-chronous rectifier circuits, the back-gate diode of the high-side P-FET x1T嘉泰姆

is forward biased in shutdown and allows current flowing from the battery to the output. However,thisx1T嘉泰姆

 device uses a special circuit, which takes the cath-ode of the back-gate diode of the high-side P-FETx1T嘉泰姆

 and disconnects it from the source when the regulator is shutdown. The benefit of this feature for x1T嘉泰姆

the system de-sign engineer is that the battery is not depleted during shutdown of the converter.  x1T嘉泰姆

No additional componentsmust be added to the design to make sure that the bat-tery is disconnectedx1T嘉泰姆

 from the output of the converter. x1T嘉泰姆
Current-Limit Protectionx1T嘉泰姆
The CXSU63139 monitors the inductor current, flowing through the N-FET, and  limits the current x1T嘉泰姆

peak at current-limit level to prevent loads and the CXSU63139 from dam-ages during overloadx1T嘉泰姆

 conditions.x1T嘉泰姆
Over-Temperature Protection (OTP)x1T嘉泰姆
The over-temperature circuit limits the junction tempera-ture of the CXSU63139. When the junctionx1T嘉泰姆

 temperature ex-ceeds 150oC, a thermal sensor turns off the both N-FETand P-FET, allowing the x1T嘉泰姆

devices to cool. The thermal sensor allows the converters to start a soft-start process and regulatex1T嘉泰姆

 the output voltage again after the junction temperature cools by 30oC. The OTP is designed with x1T嘉泰姆

a 30oC hysteresis to lower the average Junction Tempera-ture (TJ) during continuous thermal overload conditions,increasing the lifetime of the device.x1T嘉泰姆

八,相关产品                 更多同类产品......x1T嘉泰姆


Switching Regulator > Boost Converterx1T嘉泰姆

 Part_No x1T嘉泰姆

Packagex1T嘉泰姆

Archi-tecture x1T嘉泰姆

Input x1T嘉泰姆

Voltage    x1T嘉泰姆

Max Adj.x1T嘉泰姆

Output x1T嘉泰姆

Voltage x1T嘉泰姆

Switch Current Limit (max) x1T嘉泰姆

Fixed x1T嘉泰姆

Output x1T嘉泰姆

Voltage  x1T嘉泰姆

Switching x1T嘉泰姆

Frequency x1T嘉泰姆

Internal Power   Switch x1T嘉泰姆

Sync. Rectifier x1T嘉泰姆

 

minx1T嘉泰姆

maxx1T嘉泰姆

minx1T嘉泰姆

maxx1T嘉泰姆

(A)x1T嘉泰姆

(V)x1T嘉泰姆

(kHz)x1T嘉泰姆

 

CXSU63133x1T嘉泰姆

SOT89x1T嘉泰姆

VM x1T嘉泰姆

0.9x1T嘉泰姆

5.5x1T嘉泰姆

2.5x1T嘉泰姆

5.5x1T嘉泰姆

0.5x1T嘉泰姆

1.8|2.6|2.8|3x1T嘉泰姆

|3.3|3.8|4.5|5x1T嘉泰姆

-x1T嘉泰姆

Nox1T嘉泰姆

Yesx1T嘉泰姆

CXSU63134x1T嘉泰姆

MSOP8|TSSOP8x1T嘉泰姆

|SOP8x1T嘉泰姆

VMx1T嘉泰姆

2.5x1T嘉泰姆

5.5x1T嘉泰姆

2.5x1T嘉泰姆

-x1T嘉泰姆

-x1T嘉泰姆

-x1T嘉泰姆

200 ~ 1000x1T嘉泰姆

Nox1T嘉泰姆

Nox1T嘉泰姆

CXSU63135x1T嘉泰姆

TSSOP8|SOP-8Px1T嘉泰姆

VMx1T嘉泰姆

1x1T嘉泰姆

5.5x1T嘉泰姆

2.5x1T嘉泰姆

5x1T嘉泰姆

1x1T嘉泰姆

2.5|3.3x1T嘉泰姆

300x1T嘉泰姆

Yesx1T嘉泰姆

Yesx1T嘉泰姆

CXSU63136x1T嘉泰姆

SOP8x1T嘉泰姆

CMx1T嘉泰姆

3x1T嘉泰姆

40x1T嘉泰姆

1.25x1T嘉泰姆

40x1T嘉泰姆

1.5x1T嘉泰姆

-x1T嘉泰姆

33 ~ 100x1T嘉泰姆

Yesx1T嘉泰姆

Nox1T嘉泰姆

CXSU63137x1T嘉泰姆

TQFN5x5-32x1T嘉泰姆

CMx1T嘉泰姆

2.5x1T嘉泰姆

6.5x1T嘉泰姆

2.5x1T嘉泰姆

18x1T嘉泰姆

3x1T嘉泰姆

Nox1T嘉泰姆

1200x1T嘉泰姆

Yesx1T嘉泰姆

Nox1T嘉泰姆

CXSU63138x1T嘉泰姆

TSOT23-5x1T嘉泰姆

TDFN2x2-6x1T嘉泰姆

CMx1T嘉泰姆

2.5x1T嘉泰姆

6x1T嘉泰姆

2.5x1T嘉泰姆

20x1T嘉泰姆

2x1T嘉泰姆

-x1T嘉泰姆

1500x1T嘉泰姆

Yesx1T嘉泰姆

Nox1T嘉泰姆

CXSU63139x1T嘉泰姆

TQFN4x4-6x1T嘉泰姆

TDFN3x3-12x1T嘉泰姆

CMx1T嘉泰姆

1.8x1T嘉泰姆

5.5x1T嘉泰姆

2.7x1T嘉泰姆

5.5x1T嘉泰姆

5x1T嘉泰姆

-x1T嘉泰姆

1.2x1T嘉泰姆

Yesx1T嘉泰姆

Yesx1T嘉泰姆

CXSU63140x1T嘉泰姆

SOT23-5x1T嘉泰姆

CMx1T嘉泰姆

2.5x1T嘉泰姆

6x1T嘉泰姆

2.5x1T嘉泰姆

32x1T嘉泰姆

1x1T嘉泰姆

-x1T嘉泰姆

1000x1T嘉泰姆

Yesx1T嘉泰姆

Nox1T嘉泰姆

CXSU63141x1T嘉泰姆

TSOT-23-6 x1T嘉泰姆

TDFN2x2-8x1T嘉泰姆

CMx1T嘉泰姆

1.2x1T嘉泰姆

5.5x1T嘉泰姆

1.8x1T嘉泰姆

5.5x1T嘉泰姆

1.2x1T嘉泰姆

-x1T嘉泰姆

1.2x1T嘉泰姆

Yesx1T嘉泰姆

Yesx1T嘉泰姆

x1T嘉泰姆

◀ 上一篇:2.7V至6V输入电压CXSU63138固定的开关频率1.5MHz电流模式N沟道MOSFET的升压调节器内置软启动

返回顶部

下一篇▶:2.5V至6V输入电压0.6ΩN沟道MOSFET内置软启动CXSU63140固定开关频率电流模式升压集成N沟道MOSFET的稳压器