CXLB7377系列是用于单节锂离子蓄电池的定电流,定电压线性充电用IC。在内部把蓄电池充电结束时的电压设定为4.2V±0.7%。此外,把连续补充充电电压设定为2.9V±3.0%。连续补充充电模式把提供给蓄电池的电流设定为充电电流的1/10,能实现安全地给蓄电池充电。因为能选择给LIM端子输入低电平时100mA(MAX.)及输入高电平时500mA(MAX.)的高精度充电电流,适用于从USB提供充电的应用目的。备有充电状态输出端子(/CHG),在外部连接LED能确认充电状态
产品技术资料帮助
查看全部>
7.相关产品
产品概述 返回TOP
CXLB7377系列是用于单节锂离子蓄电池的定电流,定电压线性充电用IC。在内部把蓄电池充电结束时的电压设定为4.2V±0.7%。此外,把连续补充充电电压设定为2.9V±3.0%。连续补充充电模式把提供给蓄电池的电流设定为充电电流的1/10,能实现安全地给蓄电池充电。因为能选择给LIM端子输入低电平时100mA(MAX.)及输入高电平时500mA(MAX.)的高精度充电电流,适用于从USB提供充电的应用目的。备有充电状态输出端子(/CHG),在外部连接LED能确认充电状态。The CXLB7377 series is a constant-current/constant-voltage linear charger IC for single cell Lithium-ion and Lithium polymer batteries. The CXLB7377 includes a reference voltage source, battery voltage monitor, driver transistor, constant-current/constant-voltage charge circuit, overheat protection circuit and phase compensation circuit. The battery charge termination voltage is internally set to 4.2V ±0.7% and the trickle charge voltage and accuracy is 2.9V ±3%. In trickle charge mode, a safe Lithium-ion and Lithium polymer battery charge is possible because approximately only 1/10 of the full charge current is supplied to the battery. As it is possible to select a highly accurate charge current of either 100mA (MAX.) for L level input to the LIM pin or 500mA (MAX.) for H level, the series is ideal for applications where the charge is from USB. The series’ charge status output pin, /CHG pin, is capable of checking the IC’s charging state via connection to an external LED.
产品特点 返回TOP
应用范围 返回TOP
● USB charge applications
● Charging docks, charging cradles
● MP3 players, portable audio players
● Cellular phones, PDAs
● Bluetooth headsets
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
电池充电IC |
|||||||||||
产品名称 |
特点 |
封装 |
工作 电压 MIN V |
工作 电压 MAX (V) |
充电结 束时电 压(V) |
充电 电流 (mA) (MIN) |
充电 电流 (mA) (MAX) |
消耗电 流(μA) |
连续 补充 |
热敏电 阻检 测功能 |
定时器功能 |
1节 |
SOT25 SOT89-5 USP6C |
4.25 |
6 |
4.2 |
100 |
500 |
12 |
Yes |
|||
1节 |
SOT25 USP6C SOT89-5 |
4.25 |
6 |
4.2 |
100 |
800 |
15 |
Yes |
|||
1节 |
USP6EL |
4.5 |
6 |
4.2 |
40 |
280 |
100 |
Yes |
Yes |
Yes |
|
1节 |
SOP8FD USP6EL |
4.5 |
6 |
4.2 |
200 |
800 |
100 |
Yes |
Yes |
Yes |
|
1节 |
USP6B07 USP6EL |
4.5 |
6 |
4.2 |
5 |
40 |
100 |
Yes |
Yes |
Yes |
◀ 上一篇:3MHz同步开关模式电池充电器USB-OTG升压调节器CXLB7374结合开关模式电池充电器和升压调节器DC/DC转换器4伏到6伏的宽输入电压
下一篇▶:CXLB7378单节锂离子蓄电池的定电流,定电压线性充电用IC连续补充充电模式把提供给蓄电池的电流设定为充电电流的1/10能实现安全地给蓄电池充电
|