CXLB7327

CXLB7327是一款适用于单电池锂离子电池的完整恒流/恒压线性充电器。此外,CXLB7327A专门设计用于USB电源规格。由于内部PMOSFET结构,无需外部感测电阻器,也无需阻塞二极管。热反馈调节充电电流,以限制高功率运行或高环境温度下的模具温度。充电电压固定在4.2V,充电电流可以用一个电阻在外部编程。达到最终浮充电压后,当充电电流降至编程值的1/10时,CXLB7327A自动终止充电循环。当输入电源(墙壁适配器或USB电源)被卸下时,CXLB7327A自动进入低电流状态,将电池放电电流降至小于2μa。CXLB7327A可进入关机模式,将电源电流降至55μa。其他功能包括充电电流监视器、欠压锁定,自动充电和状态

CXLB7327单电池锂离子电池的完整恒流恒压线性充电器电池反向连接保护预设4.2V充电电压2.9V涓流充电阈值软启动限制涌入电流

产品手册

产品订购

产品简介

目录

  1. 1.产品概述    2.产品特点     L5P嘉泰姆

  2. 3.应用范围    4.技术规格书下载(PDF文档)L5P嘉泰姆

  3. 5.产品封装    6.电路原理图  L5P嘉泰姆

     7.相关产品L5P嘉泰姆

产品概述

 

CXLB7327A is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Furthermore the CXLB7327A is specifically designed to work within USB power specifications. No external sense resistor is needed and no blocking diode is required due to the internal PMOSFET architecture .Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature .The charge voltage is fixed at 4.2V,and the charge current can be programmed externally with a single resistor. The CXLB7327A automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed the CXLB7327A automatically enters a low current state dropping the battery drain current to less than 2μA.The CXLB7327A can be put into shutdown mode reducing the supply current to 55μA. Other features include charge current monitor, undervoltage lockout, automatic recharge and a status.L5P嘉泰姆

产品特点

 

●Protection of battery cell reverse connection L5P嘉泰姆

●No MOSFET sense resistor or blocking diode required L5P嘉泰姆

●Complete Linear Charger in ThinSOT Package for Single Cell Lithium-Ion Batteries L5P嘉泰姆

●Constant-Current/Constant-Voltage operation with thermal regulation to maximize Rate Without risk of overheating. L5P嘉泰姆

● Preset 4.2V charge voltage with ±1% accuracy L5P嘉泰姆

● Automatic Recharge L5P嘉泰姆

●Charges Single Cell Li-Ion Batteries Directly from USB Port L5P嘉泰姆

●C/10 charge termination L5P嘉泰姆

● 55μA supply current in shutdown L5P嘉泰姆

● 2.9V trickle current charge threshold L5P嘉泰姆

● Soft-Start limits inrush current L5P嘉泰姆

●Charge Status Output Pin L5P嘉泰姆

●Available in SOT23-5 PackageL5P嘉泰姆

应用范围

 

●Cellular Telephones, PDAs, MP3 Players L5P嘉泰姆

●Charging Docks and Cradles L5P嘉泰姆

●Bluetooth ApplicationsL5P嘉泰姆

技术规格书(产品PDF)

 

需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持L5P嘉泰姆

 QQ截图20160419174301.jpgL5P嘉泰姆

产品封装图

 

blob.pngL5P嘉泰姆

blob.pngL5P嘉泰姆

电路原理图

 

L5P嘉泰姆
blob.pngL5P嘉泰姆

相关芯片选择指南

   更多同类产品......
Li-ion   Battery Charger(锂电池充电芯片)
Part Number VFLOAT VIN Max Charger Charger Accu. IQ Package
Type
CXLB7326 4.2V 4.25-6.5V 800mA Linear ±1% 25uA SOT23-5
CXLB7327 4.2V 4.25-6.5V 800mA Linear ±1% 55uA SOT23-5
CXLB7328 4.2V 4.25-6.5V 800mA Linear ±1% 55uA SOT23-5
CXLB7329 4.2V 4.25-6.5V 800mA Linear ±1% 55uA SOT23-6
CXLB7330 4.2V/4.34V 4.25-6.5V 1000mA Linear ±1% 55uA ESOP8
CXLB7331 4.2V/4.34V 4.25-6.5V 1000mA Linear ±1% 55uA ESOP8
CXLB7332 8.4V/8.7V 4.7-20V 2000mA Switch ±1% 10uA SOP8
CXLB7333 4.2V/4.34V 4.7-5.5V 2000mA Switch ±1% 1uA ESOP8
Applications:①Mobile phone②MID③PDA④Battery   Charger⑤Bluetooth equipment

◀ 上一篇:独立线性单电池锂离子电池恒流恒压线性充电器CXLB7326可编程充电电流800mA自动充电状态输出引脚C/10充电终止软启动限制浪涌电流

返回顶部

下一篇▶:CXLB7328单节锂离子电池用恒定电流恒定电压线性充电器热反馈可对充电电流进行调节以便在大功率操作或高环境温度条件下对芯片温度加以限制