CXLB7310B是一款用于单电池锂离子电池的恒流/恒压线性充电器。其薄型SOT封装和低外部组件数量使CXLB7326B非常适合便携式应用。此外,CXLB7326B是专门为在USB电源规格下工作而设计的。由于内部MOSFET结构,不需要外部感测电阻,也不需要阻塞二极管。热反馈调节充电电流,以在高功率运行或高环境温度下限制模具温度。充电电压固定在4.2V,充电电流可通过一个电阻器进行外部编程。当达到最终浮充电压后,充电电流降至编程值的1/10时,CXLB7326B自动终止充电循环。当卸下输入电源(墙壁适配器或USB电源)时,CXLB7326B自动进入低电流状态,将电池放电电流降至小于2μa。CXLB7326B可进入关机模式,将电源电流降至25μa。其他功能包括充电电流监视器、欠压锁定,自动充电和状态引脚
产品技术资料帮助
查看全部>
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载(PDF文档)
一.产品概述
CXLB7326 is a constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its Thin SOT package and low external component count make the CXLB7326B ideally suited for portable applications. Furthermore, the CXLB7326B is specifically designed to work within USB power specifications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The CXLB7326B automatically terminates he charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the CXLB7326B automatically enters a low current state, dropping the battery drain current to less than 2μA.The CXLB7326Bcan be put into shutdown mode, reducing the supply current to 25μA. Other features include charge current monitor, undervoltage lockout, automatic recharge and a status pin
二.产品特点
Programmable Charge Current Up to 800mA
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in ThinSOT Package for Single Cell Lithium-Ion atteries
Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with ±1% Accuracy
Automatic Recharge
Charge Status Output Pin
C/10 Charge Termination
25μA Supply Current in Shutdown
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Available in 5-Lead SOT-23 Package
三.应用范围
Cellular Telephones, PDAs, MP3 Players
Charging Docks and Cradles
Bluetooth Applications
四.技术规格书(产品PDF)
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
五.产品封装图
六.电路原理图
七.相关芯片选择指南 更多同类产品......
Li-ion Battery Charger(锂电池充电芯片) | |||||||
Part Number | VFLOAT | VIN | Max Charger | Charger | Accu. | IQ | Package |
Type | |||||||
CXLB7326 | 4.2V | 4.25-6.5V | 800mA | Linear | ±1% | 25uA | SOT23-5 |
CXLB7327 | 4.2V | 4.25-6.5V | 800mA | Linear | ±1% | 55uA | SOT23-5 |
CXLB7328 | 4.2V | 4.25-6.5V | 800mA | Linear | ±1% | 55uA | SOT23-5 |
CXLB7329 | 4.2V | 4.25-6.5V | 800mA | Linear | ±1% | 55uA | SOT23-6 |
CXLB7330 | 4.2V/4.34V | 4.25-6.5V | 1000mA | Linear | ±1% | 55uA | ESOP8 |
CXLB7331 | 4.2V/4.34V | 4.25-6.5V | 1000mA | Linear | ±1% | 55uA | ESOP8 |
CXLB7332 | 8.4V/8.7V | 4.7-20V | 2000mA | Switch | ±1% | 10uA | SOP8 |
CXLB7333 | 4.2V/4.34V | 4.7-5.5V | 2000mA | Switch | ±1% | 1uA | ESOP8 |
Applications:①Mobile phone②MID③PDA④Battery Charger⑤Bluetooth equipment |
◀ 上一篇:可编程使充电电流1.0A预设充电电压4.2V充电电流输出监控CXLB73163单节可充电锂电池进行恒流恒压充电充电器电路软启动限制浪涌电流电流
下一篇▶:1000mA可编程充电电流单节锂离子电池恒定电流恒定电压线性充电器CXLB7311B自动终止充电循环电池电量检测的充电电流监控器输出自动再充电C/10充电自动终止
|